Black spear-top iron fence with an open walk gate across the front yard of a brick Tudor home in Dallas, crepe myrtles and a live oak

Ornamental iron

Ornamental Iron Fences in Dallas

A short black iron fence is the usual answer for a Dallas front yard, where the city caps fences at 4 feet without a permit. We install flat-top and spear-top ornamental iron for front yards, pools and side yards, with gates to match.

  • Front yard, pool and side yard fences
  • Flat-top and spear-top styles
  • Walk and drive gates to match
  • Black finish, picked to match

Get a Fence Estimate

We call you back, walk the fence line and give you a written price.

The short answer

Is "Wrought Iron" Really Iron?

Almost never anymore. What's sold as wrought iron or ornamental iron today is welded steel, made to look like traditional iron work and finished in black. It's strong, it holds its shape, and with a good finish it holds up to Texas sun and rain for a long time.

Iron is the common choice where you want to see through the fence: front yards, pool enclosures and the side yard by the driveway. For full privacy in a back yard, most Dallas homeowners pick cedar instead.

What's included

Every Iron Fence Job Includes

Panels, posts, gates and the hardware that makes them close properly.

  • Measuring the run and marking the line
  • Steel posts set in concrete
  • Panels in the style and height you pick
  • Walk and drive gates with hinges and latches
  • Self-closing, self-latching gates for pools, where required
  • Clean-up when the fence is up

Options

Where Iron Fences Go and What They Need

Height and gate hardware depend on where the fence is.

Ornamental iron fence uses
LocationTypical heightWhat to know
Front yard4 ftOver 4 ft in a Dallas front yard needs a permit
Pool enclosurePer pool barrier codeDallas requires a fence permit for pool barriers; gates need self-closing latches
Side yard and driveway4 to 6 ftOften paired with a drive gate
Back yardUp to 6 ft without a permitOpen view; pair with cedar for privacy

How it goes

How an Iron Fence Goes In

  1. Estimate

    We measure the run, mark gate locations and talk style and height.

  2. Permits and locates

    Pool barriers and taller front fences need a city permit; utility lines are marked first.

  3. Posts

    Steel posts are set in concrete on the line.

  4. Panels and gates

    Panels are fastened, gates hung and latches adjusted.

Cost

What an Iron Fence Costs

Angi's 2026 data puts wrought iron fences at about $25 to $55 per linear foot installed, the high end of common fence materials. Those are national figures, not our prices.

Height, picket style, gates and how many corners the run has move the price. A short front-yard fence with one walk gate is a much smaller job than a pool enclosure.

  • Length

    Linear feet of panels.

  • Height

    Taller panels cost more per foot.

  • Style

    Spear tops and puppy pickets add to the panel price.

  • Gates

    Drive gates cost more than walk gates.

Worth knowing

Iron in Front, Cedar in Back

On a lot of Dallas streets the front yard has a low black iron fence and the back yard has a cedar privacy fence. The iron keeps the front of the house visible and fits under the 4-foot front-yard limit; the cedar gives the back yard privacy.

If you're planning both, we can price them together and run the side-yard section in whichever material suits the gate.

Installer in a charcoal t-shirt and backwards cap driving screws into a new cedar privacy fence with a top cap along a brick house in a Dallas back yard, a stack of pickets on the grass under a live oak
Cedar for the back yard, where privacy matters.

Often paired

Often Paired With Iron

Questions

Iron Fence Questions

How tall can a front-yard fence be in Dallas?
Four feet without a permit. Taller front-yard fences need a City of Dallas fence permit.
Does an iron pool fence need a permit?
Yes. The City of Dallas requires a fence permit for pool barrier fences.
Will an iron fence rust?
Steel can rust where the finish is scratched or chipped. Touching up chips and keeping sprinklers off the fence help it last.
Can you add an iron gate to my cedar fence?
Yes. Iron and cedar are often combined, especially at drive gates.
Is ornamental iron the same as wrought iron?
In everyday use, yes. Most modern "wrought iron" fences are welded steel.

Ornamental Iron Fences Around Dallas

Estimate

Get an Iron Fence Estimate

Tell us where the fence goes and how many gates you need. We'll call to set a time to measure.

  • Measured at your property line
  • Written price for posts, pickets, gates and tear-out
  • Office at 1600 Viceroy Dr, near Love Field

Get a Fence Estimate

We call you back, walk the fence line and give you a written price.

Call