New board-on-board cedar privacy fence with a top cap along the back yard of a brick ranch in Dallas, under a big live oak

Dallas, TX · Fence contractor

Fence Installation in Dallas

Cedar privacy fences on galvanized steel posts are our core service, along with ornamental iron, vinyl, chain link, gates and fence repair. Tell us about the yard and we'll call to measure.

  • Cedar on steel posts
  • Iron, vinyl and chain link
  • Walk and drive gates
  • Repairs and post replacement

Get a Fence Estimate

We call you back, walk the fence line and give you a written price.

Cedar first

Why Build a Dallas Cedar Fence on Steel Posts?

Our fence installation in Dallas starts with the posts, because that is where a cedar fence fails first. Wood posts rot at the ground line, and Dallas clay swells and shrinks enough to push them out of line. We set galvanized steel posts in concrete and build the cedar on them.

You pick the style and height. Six feet needs no permit in a Dallas back yard; eight feet does. Read more on cedar fence installation.

  • 6-foot and 8-foot heights
  • Top cap and trim
  • Old fence torn out and hauled off
  • Gates on steel frames
Galvanized steel posts set in concrete with cedar rails on brackets and the first pickets going on, a string line along the posts
Steel posts in concrete, cedar rails on brackets, pickets going on.
  • Board-on-board

    Two overlapping layers. Stays private as the cedar shrinks.

  • Side-by-side

    One layer, edge to edge. Uses the least cedar.

  • Shadowbox

    Pickets alternate on both sides. Same look from both yards.

What we build

What Fence Installation Services Do You Offer in Dallas?

We offer six fence services in Dallas: cedar privacy fences, ornamental iron, vinyl, chain link, walk and drive gates, and fence repair. Each one has its own page with styles, heights and what the estimate covers.

Which fence where

Which Fence Fits Each Part of a Dallas Yard?

A Dallas lot often needs more than one kind of fence, because the city allows different heights in front and back. Cedar privacy fits the back yard, iron fits the front, and pools need a barrier with self-closing gates.

Fence types by location on a Dallas lot
WhereUsual choiceHeightRead more
Back yardCedar privacy6 ft, or 8 ft with a permitCedar fences
Front yardOrnamental iron4 ft without a permitIron fences
PoolIron or vinyl with self-closing gatesPermit requiredVinyl fences
Dog run or back lot lineChain link4 to 6 ftChain link
Alley or drivewayDrive gate on a steel frameMatches the fenceGates

How it goes

How Does Fence Installation in Dallas Work?

Fence installation in Dallas goes in four steps: an estimate at your property line, a written price, utility locates and any permit, then the build. You know the price before anything is ordered.

  1. Estimate

    Send the form. We call back, then walk the fence line with you and measure.

  2. Written price

    Posts, pickets, gates and tear-out, itemized so you can compare.

  3. Permit and locates

    Utility lines marked; city permit if the height calls for one.

  4. Build

    Old fence out, posts set, rails, pickets and gates on, yard cleaned up.

Before you build

Do You Need a Permit for a Fence in Dallas?

You need a permit for a fence in Dallas when it goes over 4 feet in the front yard or over 6 feet on the side or back, and always for a pool barrier. These limits come from the City of Dallas fence permit checklist.

Plano, Richardson, Garland and Irving set their own rules. Full details in the Dallas fence permit guide.

Concrete alley behind Dallas homes lined with cedar privacy fences of different ages, a steel-framed drive gate and trash carts

Back fence lines along Dallas alleys: new cedar on the left, older fences on the right.

Find us

Where Is Your Dallas Fence Office?

Our Dallas fence office is at 1600 Viceroy Dr, near Love Field. Estimates are booked through the form, and we come to your yard to measure.

The office

Fence Installation Dallas

1600 Viceroy Dr #640, Dallas, TX 75235Open 24 hours(945) 298-6315

Estimates are booked through the form. We call you back to set a time to see the yard.

Service areas

Which Cities Near Dallas Do You Install Fences In?

Besides Dallas, we install fences in Plano, Richardson, Garland and Irving. Each city sets its own fence rules, so each has its own page.

Questions

Fence Installation Questions From Dallas Homeowners

What kind of fence do you build most?
Cedar privacy fences: board-on-board, side-by-side and shadowbox, 6 or 8 feet tall, on galvanized steel posts. See cedar fence installation.
Where is your office?
Fence Installation Dallas is at 1600 Viceroy Dr #640, Dallas, TX 75235, near Love Field. The profile lists the office as open 24 hours. Estimates are booked through the form on this site.
Do I need a permit for my fence in Dallas?
In the City of Dallas, fences over 4 feet in a front yard or over 6 feet in side and back yards need a permit, and pool barrier fences always do. See the Dallas fence permit guide.
What does a cedar fence cost?
Angi puts the 2026 national average at about $6,500 for 200 feet of cedar fence. Your price depends on height, style, gates and tear-out. See cedar fence cost.
Do you fix fences, or only build new ones?
Both. We replace broken and rotted posts, loose pickets, storm-damaged sections and sagging gates. See fence repair.
Which areas do you serve?
Dallas, Plano, Richardson, Garland and Irving.

Estimate

Get a Fence Installation Estimate in Dallas

Tell us the fence type, the rough length and your ZIP code. We'll call you back to set a time to measure.

  • Measured at your property line
  • Written price for posts, pickets, gates and tear-out
  • Office at 1600 Viceroy Dr, near Love Field

Get a Fence Estimate

We call you back, walk the fence line and give you a written price.

Call