
Guide · November 2026
Do You Need a Fence Permit in Dallas?
In the City of Dallas, you need a fence permit for a fence over 4 feet tall in a front yard or over 6 feet tall anywhere else. The maximum height is 9 feet; taller fences need Board of Adjustment approval, a building permit and engineer-sealed plans. Pool barrier fences always need a permit. Permits are applied for online through DallasNow.
By Fence Installation Dallas
Dallas Fence Height Rules
These rules come from the City of Dallas Planning & Development fence permit checklist (document 26-001, June 2026). They apply inside the City of Dallas, not in Plano, Richardson, Garland, Irving or other cities, which set their own rules.
| Where | No permit needed up to | With a permit |
|---|---|---|
| Front yard | 4 feet | Over 4 feet requires a permit |
| Side and back yards | 6 feet | Over 6 feet requires a permit, up to 9 feet |
| Any yard, over 9 feet | Not allowed without approval | Board of Adjustment approval, a building permit and plans sealed by a licensed engineer |
Pool Barrier Fences
The city requires a fence permit for a swimming pool barrier fence, whatever its height. The permit submittal needs a scaled site plan showing the pool and the barrier, and elevation drawings with the barrier height, material, clearances and the height and location of the gate latch release.
Gates on pool barriers need to close and latch on their own. We build iron and vinyl pool fences with that in mind.
Materials Dallas Doesn't Allow
Unless the code specifically permits them, the checklist prohibits these fence materials:
- Sheet metal
- Corrugated metal
- Fiberglass panels
- Plywood
- Plastic materials, except approved preformed pickets or fence panels
- Barbed wire and razor ribbon (concertina wire)
Cedar, ornamental iron, approved vinyl panels and chain link are all common, allowed fence materials.
Other Things the City Checks
- Fences must keep required firefighting access to side and rear yards.
- Conservation and Historic Districts need a Certificate of Appropriateness.
- Fences in a utility easement need written authorization from the utility company.
- Designated floodplain areas may need additional approvals.
- The site plan shows visibility triangles at driveways and corners where they apply.
How to Apply
- 1. Get a plat map of the property (the city's Survey and Records Library at 320 E. Jefferson Blvd. has them).
- 2. Draw a scaled site plan showing the fence, gates, easements, driveways, sidewalks and alleys.
- 3. Draw a typical fence panel elevation showing height, grade, materials and openness.
- 4. Apply for the accessory structure permit online through DallasNow and upload the documents.
Dallas Fence Permit Questions
Do I need a permit for a 6-foot fence in Dallas?
Do I need a permit for an 8-foot fence?
Does a pool fence need a permit?
Do these rules apply in Plano or Irving?
Can my HOA be stricter than the city?
Sources
- City of Dallas Planning & Development, Fence, Pool Barrier, and Retaining Wall Permit Checklist (doc 26-001, June 10, 2026).
- City of Dallas Planning & Development Department, 320 E. Jefferson Blvd., Dallas, TX 75203, (214) 948-4480.