
Gates
Fence Gates in Dallas: Walk Gates and Drive Gates
The gate is the part of a fence you touch every day, and the part that fails first. We build cedar gates on steel frames so they don't sag, hang iron and vinyl gates, and fix gates that drag, won't latch or have pulled their post over.
- Cedar gates on steel frames
- Walk gates and double drive gates
- Iron and vinyl gates
- Sagging-gate repair
The short answer
Why Do Wood Gates Sag?
Weight and leverage. A cedar gate hangs off one post on two or three hinges, and every time it's opened the frame racks a little. Over a few years the latch side drops, the gate drags, and the latch stops lining up.
A welded steel frame behind the cedar holds its shape, and a heavy gate post set deep in concrete keeps the hinge side from leaning. Wide drive gates are usually built as a pair so each leaf carries half the width.
What's included
What Goes Into a Gate
A gate is a small structure of its own.
- Gate post sized for the gate's weight, set in concrete
- Steel frame for cedar gates
- Hinges rated for the gate
- Latch that lines up and stays lined up
- Drop rod on double gates
- Clearance set for the ground under the swing
Options
Gate Types
Width and use decide the build.
| Gate | Typical width | Used for |
|---|---|---|
| Walk gate | About 4 ft | Side yards and front walks |
| Wide walk gate | About 5 to 6 ft | Mowers and wheelbarrows |
| Double drive gate | About 10 to 16 ft | Alley and driveway access for cars and trailers |
| Pool gate | About 4 ft | Self-closing and self-latching, as pool barrier code requires |
How it goes
How a Gate Job Goes
Look
We check the posts, the swing path and what's going through the gate.
Price
A written price for a new gate or a repair.
Build
Frame, cedar or panels, hinges and latch.
Hang and adjust
The gate is hung, leveled and the latch set so it closes on its own.
Cost
What a Gate Costs
Gate prices depend on width, material and hardware more than anything else. A single cedar walk gate is a small job; a 16-foot double drive gate with a steel frame and drop rods is a bigger one.
We give you a written price after we've seen the opening and the posts.
Width
Wider gates need heavier frames, posts and hinges.
Material
Cedar on steel, iron or vinyl.
Hardware
Locking latches, drop rods and self-closers.
Posts
New gate posts if the old ones lean.
Worth knowing
Alley Gates in Dallas
A lot of Dallas neighborhoods have alleys behind the houses, and the back fence line is where the trash cans, the garage and sometimes a trailer come and go. Alley gates take more abuse than any other part of the fence.
For alley drive gates we build wide double gates with steel frames and drop rods that hold each leaf in place, so wind and slammed doors don't rack them out of square.

Often paired
Often Done With a Gate

Cedar Fence Installation
A new cedar fence with walk and drive gates built in.

Fence Repair
Leaning gate posts and sections next to the gate.

Ornamental Iron Fences
Iron walk and drive gates for front yards.
Questions
Gate Questions
Can you fix my sagging gate?
Can you add a gate to my existing fence?
Do you install automatic gate openers?
What latch should a pool gate have?
Fence Gates Around Dallas
Estimate
Get a Gate Estimate
Tell us the width and whether it's new or a repair. We'll call to set a time to look at it.
- Measured at your property line
- Written price for posts, pickets, gates and tear-out
- Office at 1600 Viceroy Dr, near Love Field